Sample Cuts

Bridge side boards, such as the one shown above, typically sell for over $200 a pair in teak, and as much as $500 a pair with the relieved lettering painted in gold and a coat of polyurethane.  Materials are about $30.  These are generally fastened to both side panels of a boat's bridge.
 
Set up your apartment-sized CNC router in a booth at boat shows, and fill orders while your customers see the rest of the show.  Set up a web site, and sell them on the Internet.  The possibilities are limitless.  This is but one example of the hundreds of categories of products that can be produced with a router mounted on a 3-D Torchmate shape cutting machine.

Examples of 2-1/2 D Routing In Aluminum and In Plastic are pictured above. If your needs are true 3-D routing, you will need to purchase either RhinoCAM or BobCAD-CAM for simultaneously moving all three axis.

Example above is a roughing cut of 3-D Routing.

The above two pictures are a single pass cut, .100” deep, 10 inches per minute travel rate, made with our base DeWALT router motor and a spray mist coolant sprayer. The material is 6061 aluminum. The Z-axis for this cut was 7-1/2” extended.

Call Toll Free 866-571-1066 for a Customized Quote
or Email us at sales@routermate.com